Directions for use: Adjust the pH to above 7.8 before adding Alum powder. Switch off filter and remove the Automatic Pool Cleaner. Disperse the Alum powder over the entire surface of the pool. 2 kg should be sufficient for a pool of 40 000 – 100 000 litres. Leave the filter switched on for 18-24 hours. The suspended matter will settle onto the pool floor and should manually vacuumed to waste within 24 hours. Contact pH necessary to the recommended range of 7.2-7.6. General pool care tips: To avoid potential staining from metals that may exists in your water, add 1 bottle of everblue Metal Remover: follow pack for instructions. Maintain filtration system in good order. Run pump for 12-14 hours/day in summer and 8-10 hours/day in winter. Efficient filtration leads to less hassle and costs in the long run. Clear out pump and weir baskets weekly. Always maintain chlorine residual at 1-3ppm (minimum). Shock treat during adverse conditions (e.g., extreme weather, prior to and after high bather loads) with advanced, dual-function Aqua cure TURBO SHOCK or will Pool Magic for metal-based pools. Clear out pump and weir baskets weekly. Brush pool walls and floor weekly. Maintain total alkalinity (TA) level at between 80-120ppm. Check this monthly. Warning: Keep out of reach of children. Store in a cool and dry place. Keep out of direct sunlight. Never mix pool chemicals. Mix only with water. First aid: In the event of contact with skin or eyes, wash thoroughly with clean water. If any irritation persists, seek medical attention. Product contains Aluminium Sulphate. Iron-free Alum powder rapidly clarifies cloudy water. It is used to settle suspended dust and dead algae spores. Alum powder will flocculate cloudy or muddy water. Size: 2 kg.
